Skip to main content

Heather Bailey Scrap Pincushion

When I first saw this Heather Bailey free downloadable pattern for this lovely pin cushion I knew I needed to make it.
You can download it at http://www.hellomynameisheather.com/ or at http://www.bhg.com/crafts/sewing/accessories/patchwork-pincushion/ either one will give you instructions and pattern pieces. I must warn you at this point since I had a slight problem with both pattern pieces from both sites. It may have been from printing that the patterns shrunk, but the sizes are different on both sites and to adjust to make them fit together correctly. This is a great project for scraps since the top and bottom are about 4" square and the outside boxing is about 2" x 16" long. I first selected a fabric.
A nice green to match my craft room. First you sew the long strip end to end. Now you have to be precise and follow the directions to make sure it fits exactly on the 4" square. This took some time to get it just right but here it is pinned and ready to be sewn.


Corners are clipped so when it is finished they are clean and sharp. The next step is to sew the other side to the boxing. This was not difficult, but you just need to go slow and leave an opening so it can be turned right side out. Then you have this.


After I got I figured it out, I decided to make another one with some more fun scraps.


I thought I should stop and complete them since I was outside on a 90+ day and it was time for some AC. First they needed to be stuffed with batting.

The directions say to stuff to a moderately firm, since this will be a pincushion. Then you sew up the opening. The next step is to thread a long needle, such as a doll makers needle, with ribbon to tuft the cushion. Sewn thru the center and loop around back thru the center four times and then tie off on the bottom. Last step is to attach a button to the center and you are done.


I just had boring plain ribbon, but the next time I will make them with some fancier ribbon. But it is a great project to use up scraps and extra buttons. This took me about 2 hours (both) after I figure out the pattern and will more than likely make them again. They might be a great gift for someone who sews!
Enjoy and check out the free downloadable pattern!




Comments

  1. Those are so cute! I love it! Good job...anything with a button is cute if you ask me :)

    ReplyDelete
  2. I love it! Definitely need to make one of those, my tomato has had it!

    ReplyDelete
  3. I like it square instead of the traditional round. Very cute!! Thanks for sharing the pattern.

    ReplyDelete
  4. aww! These are so cute! I really want to make one! Thanks for the idea : )

    ReplyDelete

Post a Comment

Popular posts from this blog

Ipad Pillow Stand

I like to watch tutorials on my Ipad and although I have a cover that converts to a stand, it isn't always the best solution for viewing. So I decided to make one of my own inspired by these Iphone stands I found on Etsy. They are sold by dognamedbanjo  and are really unique and lovely. So I thought I could make one similar to it and here is how i did it. First I started with a 1 yard of a fabric in my two favorite colors. Then I cut the following pieces 1 Pc 13" x 13" 1 pc 29 x 13" 2 Triangle pieces 13" x 13" x 13" Next I sewed the top square to the two triangles. This is will be the sides and the base. Next I took the large rectangular piece and sewed it to the bottom of the square. Now I don't have photos of the last few steps since once it start forming a pillow it is difficult to photograph, but the process is not that difficult. Next I sewed each side of the the rectangle to one side of the triangle on both s

Neck Tie Upcycled to Cuff

I found a large stash of Neck ties at an Estate Sale this past weekend and I had to buy them since I had the perfect idea for an upcycle project. They were mostly from a long since closed store here in Buffalo,NY and I felt the need to preserve them as well as the tags. I started by washing them on gentle and removing them immediately and laying flat to dry. They came out a little disfigured but nothing that a little ironing wouldn't fix. Next I took a seam ripper and opened up the back to take out the interfacing. I did this for two reasons, it was discolored and had a little odor and it would be easier to sew without this bulk.  I next cut the tie into a piece 10" long and hemmed the edge. Then I sewed two pieces of velcro to each side to make my cuff. The last step was to sew on a few antique buttons and beads and my cuff was done. Wow! Looking at this I can't believe how it turned out!.But wait... I made a few more! Love this one.. Antique Maple leave button and golden

Ultra Mini Dress Form

My obsession with mannequins continued this week when I remembered a free pattern for a tiny dress form pin cushion that I saw back in January.  It's a two page download at www.thediydish.com  with a video that takes you thru step by step of the process. I wanted to make a few of these for my craft room but thought they would also look lovely adorned with my recycled jewelry. So I started by selecting a few fabrics in colors that I love. Blues and greens are my favorite and make me feel like spring is not far away. After cutting and sewing the simple patterns and easy instructions (via video), I had these three stunning ladies in my craft room. They require very little fabric and can be mounted on candle sticks or spools. I made the long green dress form about 4" longer than the pattern since I wanted a bit of height and enough space to hang pedants. I added glass drawer knobs and beads for the neck inserts. I then added a few necklaces. I chose just a